This article explains one method for authoring an Ensoniq compatible CD-ROM with custom content. The resulting CD image can then be burned to CD-R for use with SCSI CD-ROM drives connected to an Ensoniq device. Reasons for doing so are numerous: – Backing up data from physical media (Iomega Zip, … Continue reading
Owners of Ensoniq EPS (classic), EPS16+, or ASR-10/ASR-88 units without SCSI are limited to using a floppy drive interface. Whether or not this is a traditional floppy drive or an emulator replacement (such as Lotharek or Gotek HxC/FlashFloppy), the storage limitation is the same — 800K/1600K per floppy for EPS/ASR … Continue reading
When the E4 series of samplers was initially launched, the contemporary method for authoring new Emu CD volumes was to create the new content on the sampler itself, clone the hard drive bit-for-bit via SCSI, then blindly write back the raw data to CD-R. Fortunately, advances in technology have made … Continue reading
Create your own Roland TR505 sounds with these decoder / encoder tools… Roland TR-505 Sound ROM Creation Tools v0.50 If the authored ROMs are to be used in a 4x bank (512K) configuration, such as Harry Axten’s HKA Design Roland TR-505 Expansion then the 128K ROMs can be merged with … Continue reading
E-mu Emax II (Emu Emax 2) owners seeking to upgrade the memory of their unit may be aware that the only two standard methods to get the Emax II to recognize its full memory capacity are either the memory upgrade disks (ZD403 or ZD413) or the so-called “scrambled megs” procedure. … Continue reading
