Ensoniq ASR-10 and ASR-88 SCSI Termination Power Modification (for SP-3 SCSI Interface) The usual disclaimers about liability and damaging your equipment apply. Proceed at your own risk. Be mindful of static discharge and electric shock. The ASR-10/ASR-88 should NOT be plugged in or turned on while performing this modification! The … Continue reading
Using vintage Akai, Emu, Ensoniq, Kurzweil, Roland, and Yamaha sample CD-ROMs and other instrument files with Kontakt is fairly simple to do, and does not require purchasing any additional third-party conversion software. Kontakt 6 has removed support for these legacy sampler formats, but Kontakt 5 will happily convert and (if … Continue reading
Factory included content and more for the ASR-X (black) and ASR-X Pro (red). Not to be confused with the ASR-10, although ASR/EPS content can be imported by the ASR-X models. Manuals and Documents ASR-X Series Getting Started Guide ASR-X User’s Guide ASR-X Reference Manual ASR-X Pro User’s Guide ASR-X Pro … Continue reading
WAV2EFE METHOD Use WAV2EFE to convert all WAVs to EFEs. This is very simple but does not provide for advanced features like setting loop points, having multiple wavesamples per layer, or having multiple layers. AWAVE METHOD More complicated, but provides for advanced features. STEP 1 Open Awave. On start-up, there … Continue reading
Before getting started, read this great Ensoniq samplers storage migration to SCSI2SD guide first to understand the basic concepts, as well as this article on EnsoniqFS as a basic primer. The problem most people will run into is that Total Commander/EnsoniqFS cannot access more than one partition of an Ensoniq … Continue reading
